Cleaning the interior components – Whirlpool 2180633 Manuel d'utilisation
Page 13
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
C L E A N I N G Y O U R I C E M A K E R
Cleaning the interior components
A
warning
Electrical Shock and
Product Damage Hazard
• Do not operate ice maker with bwer
access panel or control panel removed.
Electrical shock or personal injury could
result.
• Do not wash plastic parts in dish
washer. They cannot withstand
temperatures above 145°F (63°C).
Failure to follow the above precautior»
could result in electrical shock or product
damage.
1. Disconnect the electrical power supply to
the machine, and turn the Cycle Control
Knob to “OFF.” Open the storage bin door
and remove any ice that is in the bin.
2. Remove ice retainer baffle by flexing K and
then slide it off the studs.
3. Remove the ice cutter grid by unscrewing
the two thumb screws, sliding the grid
forward, and unplugging the electrical wire
harness.
removing the two thumb screws and
washers.
5. Remove the hose from the water pump.