Panasonic PanaFlat LC40 - Manuel (Page 14)

Operation
< Onscreen Display> < Function and Operation>
MONITOR SELF-TEST
figure A
'ii: ii"
W -
One of the MONITOR SELF-TEST menus
displays if the main unit is operating correctly and
one of the conditions describe below are true.
Press any of the five Control Panel keys {Menu,
3, B, +) if the power Indicator is lit.
1) SIGNAL ERROR will be displayed when the
input synchronization signal exceeds the
specified range. See figure A.
2) NO SIGNAL will be displayed if there is no
input signal. For example, this occurs when
the computer is not connected or the computer
power is off. See figure B.
3) NO SIGNAL will also be displayed when the
computer power saving mode is set to the
OFF STATE as the are no displayable video
signals coming from the computer. See
figure B. (See Page 14, Power Management
System, OFF STATE)
MENU
When the resolution is 640 x 400 to 832 x 624.
ITO) CONTiRASTi
There are two different MENU screens
depending on the current screen resolution. The
items to be adjusted are represented by icons.
When the MENU key is pressed, a MENU screen
appears. Use the 3 B keys to move the cursor
to the item to be adjusted, selected or displayed,
then press the - or + keys to adjust or select.
CONTRAST BACKLIGHT H, POSITION H. SIZE
V, POSITION V. SIZE COLOR TEMP VIDEO LEVEL
DISP. FREQ LANGUAGE RECALL AUTO SIZE
[PAGE 10 CONTRAST adjustment]
When the resolution is 1024 x 768,
CONTRAST BACKLIGHT H.POSITION V.FINETUNE
V. POSITION H.FINETUNE COLOR TEMP VIDEO LEVEL
DISP. FREQ LANGUAGE RECALL AUTO SIZE
[PAGE 10 CONTRAST adjustment]
- 9
-