Caution for mounting the lens, Caution – Panasonic WV-CL834 Manuel d'utilisation
Page 13
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Mounting the Lens
Caution for Mounting the Lens
Caution:
Before you mount the lens, loosen the two screws
on the ring, and rotate this ring clockwise until it
stops. If the ring is not at the end, the inner glass
or CCD irnage sensor may be damaged.
1. Mount the lens by turning it clockwise on the lens
mount of the camera.
2. Connect the tens cable to the auto iris lens con-^.
nector on the side of the camera.
The lens mount should be a C-mount or CS-mount (1"-
32UN) and the lens weight should be less than 450g
(0.99 lbs). If the lens is heavier, both the lens and cam
era should be secured by using the supporter.
The protrusion at the rear of the lens should be as
shown below:
C-mount: Less than 11 mm (7/16")
CS-mount: Less than 6 mm (1/4")
-
11
-