Specifications, General, Am radio – Panasonic Removable Face High Power CD Player/Receiver with Changer Control DP850 Manuel d'utilisation
Page 30: Fm stereo radio, Cd player
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Specifications
30
General
Power Supply:
12 V DC (11 V -16 V), Test Voltage 14.4 V, Negative ground
Maximum Power Output:
40 W X 4 channels at 400 Hz, Volume Control maximum (CQ-DP875EUC)
EIA Power Output:
35 W X 4 channels at 400 Hz, Volume Control maximum (CQ-DP850/830EUC)
14 W per channel into 4 ohms, 20 to 30,000 Hz, at 1% THD (CQ-DP875EUC)
Tone Action:
9 W per channel into 4 ohms, 20 to 30,000 Hz, at 1% THD (CQ-DP850/830EUC)
Bass, ±12 dB at 100 Hz, Treble; ±12 dB at 10 kHz
Pre-Amp Output Voltage:
2.0 V (CD Play Mode; 1 kHz 0 dB)
Output Impedance:
600 Q
Current Consumption:
Less than 1.7 A (CD Play Mode)
Dimensions Main Unit (WxHxD):
7” X M 5/16” X 5-7/8” (178 X 50 X 150 mm)
Weight Main Unit:
3 lbs 12 oz (1.7kg)
AM Radio
Frequency Range:
530- 1,710 kHz
Useable Sensitivity:
28 dB/pV (25pV, S/N 20 dB)
FM stereo Radio |
Frequency Range:
87.9- 107.9 MHz
Useable Sensitivity:
13.2 dBf. (1.25 pV, 75 П)
50 dB Quieting Sensitivity:
15.2 dBf. (1.6 pV, 75 0)
Frequency Response:
30- 15,000 H z ± 3 d B
Capture Ratio:
1.5 dB
Alternate Channel Selectivity:
75 dB
Stereo Separation:
42 dB at 1,000Hz
Image Response Ratio:
75 dB
IF Response Ratio:
100 dB
Signal/Noise Ratio:
70 dB
CD Player
Sampling Frequency:
32 times oversampling
DA Converter:
MASH-1 bit/4 DAC System
Error Correction System:
Panasonic Super Decoding Algorithm
Pick-Up Type:
Astigma 3-beam
Light Source;
Semiconductor laser
Wavelength:
780 nm
Frequency Response:
20 Hz to 20,000 Hz, ±1 dB
Signal/Noise Ratio:
96 dB
Total Harmonic Distortion:
0.01% (1,000 Hz)
Wow and Flutter:
Below measurable limits
Channel Separation;
75 dB
* Above specifications comply with EIA standards.
Note:
Specifications and design are subject to modification without notice due to improvements in technology.