Thetford 2118 Series Installation Manual - Manuel (Page 19)

Installation Manual 19
- On 2-way models, the mode indicators are (See Art02493):
- Auto mode AC electric [281]
- Auto mode gas [282]
- Manual mode AC electric [283]
- Manual mode gas [284]
3. Select the temperature setting:
- Push and hold the TEMPERATURE SET button [32] to
scroll through the temperature settings, one after the other
(See Art02492).
- Or push and release the TEMPERATURE SET button
again and again to change the temperature settings, one
at a time.
- The temperature settings [278] come on as numbers in the
LCD.
- Select one of nine (9) temperature settings:
- One (1) is the warmest temperature setting.
- Nine (9) is the coldest temperature setting.
Do a test of the gas safety valve:
1. Start up the refrigerator in the manual mode operation.
2. Open the lower intake vent.
3. Remove one wire from the solenoid of the gas safety valve at the rear of the refrigerator.
4. Within 30 seconds, the fl ame should extinguish. This means that the gas safety valve is operating correctly.
5. Put the wire back on the solenoid of the gas safety valve.
6. Close the lower intake vent.
Shut down - all models:
To shut down the refrigerator, push and hold the ON/OFF button for one second.
set set
set set
284
282
281
283