Thetford 2117 Series 636691 - Manuel (Page 9)

Owner’s Manual 9
Operating the Refrigerator Controls
AC Operation 120 volts AC (108 volts min.-132 volts max.)
Propane gas operation: Propane gas (11 inches water column pressure)
12 volts DC - control voltage (10.5 volts min. - 15.4 volts max.)
The refrigerator operates on these energy sources. Operation out of these limits can damage the refrigerator electrical components
and will void the warranty.
Control panel:
The refrigerator control panel (See Art01809 and Art01811) is between the freezer compartment and the fresh food compartment. To
maintain the operating control functions of the refrigerator, a 12 volt DC power supply is necessary. The refrigerator receives DC power
from the 12 volt system of the vehicle; either an auxillary battery, a converter, or the vehicle engine battery.
The ON / OFF button [30] starts and shuts down the
refrigerator:
- To turn on the refrigerator, push and release the ON /
OFF button.
- To turn off the refrigerator, push the ON / OFF button for
one second and then release.
The SET TEMP button [32] controls the temperature
adjustment of the freezer and the fresh food compartment.
The temperature adjustment that you select does not
change if the operation mode of the refrigerator changes.
- Push the SET TEMP button and a red triangle shows
under the temperature setting numbers “1-9” [187] in
the LCD [107].
- The number “9” is the coldest temperature setting.
- Push and hold the SET TEMP button and the
temperature setting changes.
- Release the SET TEMP button when the temperature setting that you wish appears.
Temperature switch monitor:
The refrigerator is equipped with a temperature switch [142] for overheating protection
(See Art02243) . A Norcold authorized service technician can determine if this switch has
been triggered.
142
Art02243
Art01809
30 31 107 32 184
Art01811
185 186 187 33