Kidco G14c - Manuel (Page 4)

Warranty
KIDCO LIMITED WARRANTY
Your KidCo product is warranted to be free from manufacturing defects for a period of one
year from date of purchase under normal non commercial use and in compliance with the
operating instructions. This warranty extends only to the original retail purchaser and is only
valid when supplied with proof of purchase.
KidCo will either repair, or at our option replace, free of charge, any parts necessary to
correct defects in material or workmanship during the warranty period. This warranty is
complete and exclusive. The warranty expressly disclaims liability for incidental, special and
consequential damages of any nature. Any implied warranty arising by operation of law shall
be limited in operation to the terms of this warranty. Some states do not allow the exclusion
or limitation of incidental or consequential damages or limitations on how long an implied
warranty lasts, so the above may not apply to you. This warranty gives you specific legal
rights, and you may have other rights which vary from state to state.
SHOULD REPAIR OR PARTS BE NECESSARY
Should a repair be needed during the warranty period, ship the gate in the original carton or
similar protective container (check any retail store or purchase from UPS) and send freight
prepaid (we suggest UPS) to:
KidCo, Inc., 1013 Technology Way, Libertyville, IL 60048-5349.
Include a note with your return address, day-time telephone number, and specify what is
wrong with the product. Repairs can normally be made within 48 hours after receipt at
KidCo. For additional information CALL our customer service department at (800) 553-5529.
4
Installation
13. TO COLLAPSE
When gate is no longer needed, it can be stored
in its carrying case.
Remove gate from opening and close handle.
Push button on top rail (b) and slide sections
together to the next smallest width.
Repeat for bottom rail (c) and alternate bottom
and top rails until smallest gate width is achie-
ved. It may also be necessary to retract
spindles.
14. Release locks are located in middle of each
side, indicated by printed icons on fabric. Doing
one side at a time, squeeze lock while gently
pressing inward. Repeat on second side.
15. When collapsed, top and bottom plastic
hinges will be touching.
Gate can now be placed in carrying case.