Sony DVMC-DA2 - Manuel (Page 12)

V Tip
TVs which conform to the
ID-1 system automatically
switch to wide mode
when the appropriate
signal is received.
Viewing digital video on your TV
You can enjoy higlt quality digital video when you
connect tlie DV unit to the TV via the media converte
1
Press POWER to turn on the media converter.
2
Press DV IN.
The key indicator lights up.
3
Start playback on the DV unit.
Pictures played back on the DV unit appear on tht
TV screen.
Playing back the audio while changin
the mixing rate
When playing back video recorded in 12-bit audio
mode on a DV imit via the media converter, you can
listen to; the recorded message and/or backgroimd
music only (post sound recording), the original audic
or the combined audio of both tracks with the desirei
mixing rate (5 steps).
Press and while holding DV IN, press ANALCXl
IN.
Each time you press ANALOG IN, the mixing rat
changes as follows:
Original audio Added audio
Viewing digital video on your TV (continued)
Note
When the power on the
media converter is turned
off, the mixing rate is
reset to the default setting
(original audio: 100%,
added audio: 0%).
100
%
75%
50%
25%
0 %
0 %
25%
50%
75%
100 %
12-'