Craftsman 919.722020 - Manuel (Page 10)

10- ENG D29495
ASSEMBLY
Assemble Hose
1. Assemble hose to air outlet.
IMPORTANT: The hex fitting on
the air outlet MUST be held in
place with a wrench when
tightening hose onto air outlet.
Tools Required for Assembly
1 - 9/16" open end wrench or
adjustable wrench
1 - adjustable wrench
Unpacking
1. Remove unit from carton and
discard all packaging. NOTE:
Save all parts bags.
Contents of Carton
1 - Air Compressor
1 - Air Hose
1 - Inflator Accessory Kit
Assemble Other Accessories
1. Attach the hose adapter to hose.
2. Choose the needed accessory.
Attach the tapered nozzle,
extension tube, or blow gun
adapter to the hose adapter. The
inflating needle attaches to the
blow gun adapter. NOTE: The
tapered nozzle, extension tube,
and blow gun adapter can also
be attached to a blow gun (sold
separately, not shown).
Assemble Accessories
Choose the accessory needed.
Assemble Female Tire Chuck
1.
Assemble female tire chuck to
hose and tighten securely with
wrenches.
Female Tire
Chuck
Hose
Adapter
Hose
End
Tapered
Nozzle
Blow Gun
Adapter
Inflating
Needle
Extension Tube