Curtis PL4210A-2 - Manuel (Page 30)

29
Trouble Shooting
Before consulting service personnel, check the following chart for possible solutions.
PROBLEM SOLUTION
TV will not turn on
●Make sure the power cord is plugged in.
●The batteries in the remote control may be
Exhausted; replace the batteries.
No picture, no sound
●Check the cable between TV and antenna/
external
AV device.
●Press the power button on the remote.
●Press the SOURCE button the remote, then press
the “ ▲/▼”button repeatedly to select the TV
source.
Poor picture, sound OK
●Check the cable between TV and antenna/
external
AV device.
●Try another channel, the station may have
broadcast difficulties.
●Adjust the brightness/contrast in the Video menu.
Check that the unit is set to PAL
Audio noise
●Move any infrared equipment away from the TV.
The TFT
PDP panel uses a panel consisting of sub pixels which requires sophisticated
technology to produce. However, there may be a small number of bright or dark pixels on
the screen. These pixels will have no impact on the performance of the product.