La Cornue CornuFé 44 Conversion to Propane Gas - Manuel (Page 5)

5
SERVICING - WARNING
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
Type 1
Unscrew the hexagonal nut in the front of the regulator.
The regulator nut has a plastic snap in converter device
on the underside, to convert the regulator snap the
device out of the nut and replace the other way up.
set for Natural gas set for Propane gas
The snap in converter device is marked to show which
gas it is set for. Make sure the device is secure in the
base of the nut and replace the nut to the regulator.
Type 2
The regulator has a
bayonet mounted top
cap.
Using a small coin press
in and turn the cap to
remove it.
Turn the cap over so that the letters “LP” are visible on
base of the hollow in the cap. Replace the cap making
sure that the bayonet pins are securely located.
set for Natural gas set for Propane gas
Gas Regulator
Remove the storage drawer. Pull it out to its furthest
point.
Lift up the ends of the plastic clips (one each side) to
release the catches holding the drawer to the side rails
and at the same time pull the drawer forward and away
from the side rails. For safety’s sake push the drawer rails
back out of the way.
The regulator is now accessible.
The regulator may be one of two types.