SPYPOINT IR-B 5mp - Manuel (Page 15)

5
SETTINGS
Picture Quality, Date and Time
Turn off your camera, set the mode switch to «Set/Test» and set
the power switch to «ON». Press «MENU» once. The default
setting «H» (5MP) icon will flash. Use «DOWN» if you want to
change to «L» resolution (3MP). Press «MENU» button to set
date and time. Use «UP» and «DOWN» to change the blinking
number. Press «MENU» to set next option. Press «OK» and
turn off the system to record the changes. The camera’s internal
memory (32MB) can store approximately 65 pictures in 3MP
mode (low resolution) and 39 pictures in 5MP mode (high
resolution). The SD slot accepts optional SD/MMC card to
record more pictures.
MODE
When you select «Photo» or «Video», the test
light on the front of the unit will light for 60
seconds while the detector charges up. When
you select «Set/Test» you can set your system
or test the distance setting. The test light on the front of the
unit will light when the camera detects motion. When you’ll
notice how the camera reacts to your motion, you may want
to adjust the distance setting, change the direction or height of
the camera. The camera doesn’t take pictures while in «TEST»
mode.
When «MODE» switch is set to «TV/OUT», you can review
the recorded pictures or videos. Turn OFF your camera and
select «TV/OUT». Plug the supplied video cable from the
camera to your television and turn «ON» the camera. You will
see the latest picture taken by your system. To change pictures
use «UP» or «DOWN» keys. When you push «MENU», you
can delete one picture, «DELETE ALL» picture or «FORMAT»
the SD card. Press «OK» to confirm.
English