SPYPOINT Bloodline - Manuel (Page 5)

5
MAIN FEATURES
• LCD display mode: date, time and number of pictures.
• Adjustable PIR sensitivity.
• Color pictures during day; black and white at night.
• Multi-shot pictures (up to 4 per detection).
• Video length adjustable from 10 to 90 seconds.
• Adjustable delay between motions from 1 to 15 minutes.
• Night-time photos and videos taken with 46 LED.
• Removable internal camera for easier handling.
• Water resistant housing case.
• Automatic print of date, time, temperature and moon
phase on every picture.
• Auxiliary power jack for external 12 volt DC input.
• Optional use of a solar panel SP-12V to maintain the
charge of the lithium battery pack LIT-C-8. (optional)
POWER
The battery level is shown in the bottom right corner of the
screen when the camera is in «TEST» mode. When a single
line remains, the camera will continue to take pictures but we
strongly recommend changing the batteries before they are
empty. (See figure below)
Alkaline batteries
This camera requires the use of 6 AA batteries (1.5V). The
use of alkaline batteries is strongly recommended. Also note
that the voltage of rechargeable AA batteries (1.2V) is
insufficient to power your SPYPOINT camera. During the
installation of alkaline batteries, place the switch inside the
battery case to «ALKALINE». Insert the batteries as indicated
inside the battery case. Exact polarity must be followed. We
also recommend the use of new batteries to ensure maximum
performance of your camera.
English