Bushnell Trail Sentry 119305 Manuel d'utilisation

Page 9

Advertising
background image

9

Setup Guide (cont.)

last two digits blinking (“20_ _”) (d). Again use the Up/Down buttons to change the
year if necessary, press enter, and set the time (“TIME” will flash, press enter and use
Up/Down to set the hour and minute. The time display uses the 24 hr standard, so 2:00
PM is indicated as “1400”, etc).
4. After the date and time have been set, and Enter is pressed, “EVENT” will flash on
the display. Press Enter and the “camera” icons for still photos and movie clips will both
blink (e). Press Enter again, and only the still camera icon will blink. Pressing the UP or
DOWN buttons will now cycle between the 2 photo mode choices: Still Photos or Video
Clips. This allows you to choose which type of file will be recorded every 30 seconds
for as long as motion and heat events are detected. Select the photo mode you prefer and
press ENTER while that icon is blinking.

d

e

5. After selecting still photo or movie clip mode, press ENTER. Two options for
still photo resolution, LO and HI will blink (f). Press ENTER again and use the UP
or DOWN buttons to set the resolution. LO resolution (2MP on Standard model, 3MP
on Night Vision models) will allow you to store more photos on the SD card before it
is filled, and the quality is suitable for viewing on a PC monitor, email or web sites,
and making small prints. HI resolution (4MP on Standard model, 5MP on Night Vision
models) creates larger files via software interpolation, taking up more space on the card,
but they are higher quality, better suited for printing enlargements or capturing more
detail. After setting the still photo resolution, press ENTER.
6. (Night Vision models only) After selecting still photo or movie clip mode, press ENTER. The “Sun” icon
will blink (g-see next page). Press ENTER again and use the UP or DOWN buttons to set the hour-this is the
time the camera will consider to be the start of the “Day”. During the Day, normal color photos or videos will be
taken. If the lighting conditions become dark or cloudy, the standard flash will fire to help illuminate the photo.

f

119204+119305+119505 Trail Sentr9 9

3/17/08 11:53:56 PM

Advertising
Ce manuel est liée aux produits suivants: