Humanscale Diffrient Work Light II - Manuel (Page 2)

Desktop Base Mount
Place base on work surface.
Clamp Mount
Place the clamp mount on the edge
of the work surface and tighten the
fastening screw (a) until secure.
Direct Mount
Place the mount on the work surface. Secure with
a screw.
2-Piece Clamp Mount
Remove the L-bracket (bottom portion of the mount)
by loosening both screws, then lifting it up and away
from the top portion of the mount (b).
Slide the back of the top portion of the mount along
the edge of the work surface, resting the cone-
shaped top on the surface.
Reinstall the L-bracket, tightening both screws.
Tighten the fastening screw (c) until mount is
secured to work surface.
ENGLISH
Versatility and sustainability reach new heights with the elegantly engineered
Diffrient Work Light II™.
WARNING! For your safety, please follow these instructions during installation
and use. Before beginning, be sure the lamp is unplugged.
1. Install the mount.
a
c
b