Braun 2570 - Manuel (Page 7)

8
• For underarm and bikini line
epilation, we recommend that you
use the epilation head
(without
attachment ).
• To change the epilation heads,
press the release buttons on
the left and right and pull off the
epilation head.
• Plug the cord connector into
the socket and plug the trans-
former plug into an electrical
outlet.
1. To turn on the appliance, slide
switch up to setting «2»
(«2» = normal epilation,
«1» = gentle epilation).
2. Rub your skin to lift short hairs.
Hold the appliance at right angles
(90°) against your skin and guide it
against the hair growth and in
the direction of the switch. Both
rollers of the 4-way moving pain
softener should always be kept in
contact with the skin, allowing the
pulsating movements to stimulate
and relax the skin for a gentler
epilation.
3. Leg epilation (epilation head
with attachment )
Epilate your legs from bottom
upwards. When epilating behind
the knee, keep the leg stretched
out straight.
4. Underarm and bikini line epilation
(underarm epilation head )
User tests monitored by dermatol-
ogists have shown that you may
epilate under the arm and at the
bikini line as well. For this specific
application, the narrow underarm
epilation head has been develop-
ed. Thanks to its specific design
adapted to the contours of these
areas it provides a gentle and
thorough epilation. Be aware that
these areas are particularly
sensitive to pain. However, the
pain sensation will diminish with
repeated usage.
For this specific application, we
would like to give the following
advice:
Before epilating, thoroughly clean
the respective area to remove
residue (like deodorant).
Then dry with a towel, carefully
using a dabbing action.
When epilating underarm, keep
your arm raised up and guide the
appliance in different directions.
Cleaning the epilation head
5. After epilating, unplug the
appliance and clean the epilation
head used:
When cleaning the epilation head
, first take off the the 4-way
moving pain softener and brush
out the rollers.
6. Thoroughly clean the tweezer
element with the cleaning brush
and also with cleaning fluid
(e.g. alcohol). While cleaning, you
can turn the tweezer element
manually. To remove the epilation
head, press the release buttons
on the left and right and pull it off.
7. Give the top of the housing a quick
clean with the brush.Place the
8
1
3
6
5
7
4
2
1
8
2
1
3
5356417_2590/70_P6-44 Seite 8 Donnerstag, 19. September 2002 1:07 13