Bushnell 201951 - Manuel (Page 10)

10
aCtive laser
Crosshairs surrounding the aiming circle indicate that the laser is being
transmitted. Once a range has been acquired, you can release the POWER
button. The crosshairs surrounding the circle will disappear once the POWER
button has been released (i.e. the laser is no longer being transmitted).
pinseeker™
Ever have trouble getting distance to the flag? This advanced feature
allows easy acquisition of the flag without inadvertently getting distances to
background targets (i.e. trees) that have stronger signal strength. Simply align
the aiming circle reticle onto the flag that you want distance to. Next, press
and hold the POWER button and move the laser slowly over the flag or desired
object until a circle surrounds the flag indicator. If the laser beam recognized
more than one object (i.e. flag and background trees), distance of the flag
will be displayed and a circle will surround the PinSeeker indicator informing
the user that distance to the flag (i.e. closer object) is being displayed in the
LCD (as seen below). There may be times when only the laser beam only sees
one object in its path. In this case, the distance will be displayed, but because
more than one object was not acquired, a circle will not surround the flag
indicator.
TIP: While pressing the POWER button, you can move the device slowly from object to object and intentionally
force the laser to hit multiple objects to verify that you are only displaying the closest of the objects recognized
by the laser.