Speaker setup 17, Connecting the speaker wires to the speaker jacks, Setting up surround sound – Philips MX5100VR-37B Manuel d'utilisation

Page 17: Helpful hints

Advertising
background image

Speaker Setup 17

VIDEO

TV ANTENNA

AUDIO

R

L

PROGRESSIVE

OUT

IN

ANTENNA 75

ANTENNA 75

Y

Pb/Cb

Pr/Cr

FM

(75

)

DIGITAL
AUDIO OUT
COAXIAL

S-VIDEO

OUT

VCR
IN

DVD/

VCR
OUT

COMPONENT
VIDEO OUT

AM

FL

FR

C

SL

SR

W

SPEAKER (4

)

P I

Center Speaker

Subwoofer

Front

Speaker

(left)

Rear Speaker

(left surround)

Rear Speaker

(right surround)

Front

Speaker

(right)

FL (Front Left - white)

FR (Front Right - red)

C (Center - green)

SL (Surround/Rear Left - blue)

SR (Surround/Rear Right - grey)

W (Subwoofer - purple)

Connecting the speaker wires to the speaker jacks

1

Connect the supplied speakers using the supplied speaker
wires. Match the colors of the wires to the colors on the
jacks.
Hold down the jack tab while inserting the stripped
portion of the speaker wire into the jack.Then, release
the tab.

Make sure you do not insert the wire too far. None

of the rubber-coated wire should be clamped by the jack tab.

Setting up Surround Sound

Connect all the speakers and set up the System properly in order to
enjoy the Home Cinema experience.

1

Place the FRONT Left and Right speakers at equal distances
from the TV and at a 45-degree angle from the listening
position.

2

Place the CENTER speaker above or below the TV to localize
the sound.

3

Place the REAR (Surround) speakers at normal listening ear
level, facing each other or mounted on the wall. Use the
supplied mounting brackets to mount speakers to the wall.

4

Place the Subwoofer on the floor, near the TV.

VIEWING AREA

Center Speaker

Subwoofer

Front

Speaker

(left)

Rear Speaker

(left surround)

Rear Speaker

(right surround)

Front

Speaker

(right)

TV

• Connect the speaker wires

correctly. Improper connections
may short circuit the System.

• For optimal sound, use the

supplied speakers.

• Do not connect more than one

speaker to any pair of speaker
jacks on the System.

• Do not connect speakers with an

impedance lower than 6 ohms.

• Sit in your usual listening position

to set up the speaker balance.
Details are on pages 52-53.

• To avoid magnetic interference, do

not place the FRONT speakers too
close to your TV.

• Placing the REAR (Surround)

speakers farther from the listening
position than the FRONT and
CENTER speakers will weaken the
Surround Sound effect.

• Secure all speakers to prevent

accidents and improve sound
quality. Use the supplied mounting
brackets to mount speakers to a
wall. Details are on page 18.

Helpful Hints

MX5100VR.qxd 6/04/2004 3:37 PM Page 17

Advertising