Philips SQM6485-17 - Manuel (Page 2)

2
EN
Caution
This product is designed strictly for installation on a vertical wall in commercial and residential buildings. It is constructed •
of wooden wall studs (16”
(40cm)
or 24”
(60cm)
pitch), masonry (brick) or solid concrete only.
This product is designed for easy connection of cables and peripherals. Avoid exerting excessive pulling force during •
connection or this can damage the product.
This product is designed for use with all display models that incorporate respective VESA mounting standard. Ensure the •
display is within the specified weight limit. Mounting any other type or model of display is a potential safety risk. Philips
declines all liability resulting from the unauthorized use of this wall mount.
This product is not designed for installation on walls constructed of metal studs or studs with a pitch exceeding 24” •
(60cm)
.
If you are unsure of your wall composition, contact a qualified installer.
To avoid weakening the wall strength, drill at least 1” •
(2.5cm)
away from another drill hole. If the wall mount bracket is not
perfectly level, adjust the angle of the display later, as described in the wall mount guide (section 3, image
b
).
The roller mechanism is designed for a perfect leveling during installation. Avoid frequent moving of the rollers inside the •
rail as this can unscrew the rollers and cause damage to the rollers and the display.
The wall or mounting surface must be capable of supporting the combined weight of the mount and the display; •
otherwise the structure must be reinforced.
Safety gear and proper tools must be used. Failure to do so can result in property damage and/or serious injury. •
A minimum of two people are required for this installation. Do not attempt to install this mount alone under any •
circumstance.
The wall mount allows a limited tilting movement if you pull on the bottom edge of the display. However, for inserting and •
adjusting cables and connectors, we strongly advise you to dismount the display.
Follow all instructions and recommendations regarding suitable locations for mounting your display. Consult the owner’s •
manual for your display for more information.
Maintenance
After installation, brackets require regular maintenance and inspections periodically to prevent the possibility of rot, •
deformation and looseness.
Warranty
Warranty information can be found at: www. philips.com/welcome. For technical support, send us an email with the model •
number of the product and a detailed description of your problem to: [email protected]
Limited One-Year Warranty Philips warrants that this product shall be free from defects in material, workmanship and •
assembly, under normal use, in accordance with the specifications and warnings, for one year from the date of your
purchase of this product. This warranty extends only to the original purchaser of the product, and is not transferable.
To exercise your rights under this warranty, you must provide proof of purchase in the form of an original sales receipt
that shows the product name and the date of purchase. For customer support or to obtain warranty service, please call
1-919-573-7854. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. Philips’ liability is limited to repair or, at
its sole option, replacement of the product. Incidental, special and consequential damages are disclaimed where permitted
by law. This warranty gives you specific legal rights. You may also have other rights that vary from state to state. Warranty
information can also be found at: www.philips.com/welcome
!
! CAUTION
The maximum loading weight is 152lbs
(70kg)
. Use
heavier than that may cause injury. TV size: 42 - 60 inch
(107 - 152cm)
. See apparatus instructioins.