Philips SalonDry 'n Straight Sèche-cheveux - Manuel (Page 11)

troubleshooting
If problems arise with your hairdryer and you are unable to solve them
with the information below, contact the nearest Philips service centre or
the Philips Customer Care Centre in your country.
Problem Cause Solution
The
appliance
does not
work at all.
Perhaps the
socket to which
the appliance is
connected is
not live.
Make sure the socket is live.
The appliance
may have
overheated and
switched itself
off.
Unplug the appliance and let it cool
down for a few minutes. Before you
switch on the appliance again, check
the grilles to make sure they are not
blocked by fluff, hair, etc.
The appliance
may not be
suitable for the
voltage to
which it is
connected.
Make sure that the voltage indicated
on the type plate of the appliance
corresponds to the local mains
voltage.
The mains cord
of the appliance
may be
damaged.
If the mains cord is damaged,
you must have it replaced by Philips, a
service centre authorised by Philips
or similarly qualified persons in order
to avoid a hazard.
EnglisH 11