Philips Do-It-Yourself clipper Se tondre les cheveux soi-même Manuel d'utilisation

Page 3

Advertising
background image

Attention

- N’utilisez jamais l’appareil dans le bain ni sous

la douche.

- Utilisez, rechargez et conservez l’appareil à une

température comprise entre 5 °C et 35 °C.

- Utilisez exclusivement l’adaptateur fourni pour

charger l’appareil.

- Si l’adaptateur secteur est endommagé, il doit

toujours être remplacé par un adaptateur

secteur de même type pour éviter tout

accident.

- Afin d’éviter tout accident, n’utilisez pas

l’appareil si le bloc tondeuse ou si l’un des

sabots est endommagé ou cassé.

- Cet appareil a été conçu uniquement pour

tondre les cheveux. Ne l’utilisez jamais à

d’autres fins.

- Si l’appareil devait être soumis à une forte

variation de température, de pression ou

d’humidité, laissez-le s’acclimater pendant

30 minutes avant de l’utiliser.
Conformité aux normes

- Ce rasoir est conforme aux normes

internationales IEC et peut être nettoyé à l’eau

en toute sécurité (fig. 2).

- Cet appareil Philips est conforme à

toutes les normes relatives aux champs

électromagnétiques (CEM). Il répond aux

règles de sécurité établies sur la base des

connaissances scientifiques actuelles s’il est

manipulé correctement et conformément aux

instructions de ce mode d’emploi.
Avant la première utilisation

1

Lubrifiez le bloc tondeuse avec 3 gouttes de

l’huile fournie (fig. 3).
Charge

Chargez l’appareil pendant au moins 1 heure avant

la première utilisation ou après une longue période

de non-utilisation.

Une fois chargé, l’appareil dispose d’une autonomie

sans fil de 1 heure environ.

Lorsque le voyant de charge clignote en orange, la

batterie est presque déchargée (environ 7 minutes

d’autonomie restantes). Il faut alors recharger

l’appareil.

1

Assurez-vous que l’appareil est éteint.

2

Insérez la fiche de l’adaptateur dans l’appareil,

puis branchez l’adaptateur sur la prise

secteur (fig. 4).

, Le voyant de charge se met à clignoter en

blanc pour indiquer que l’appareil est en

cours de charge (fig. 5).

FrAnçAis

introduction

Félicitations pour votre achat et bienvenue dans

l’univers Philips ! Pour profiter pleinement de

l’assistance Philips, enregistrez votre produit sur

le site à l’adresse suivante : www.philips.com/

welcome.

Votre nouvelle tondeuse Philips au design

ergonomique et à tête pivotante à 180° vous

permet de vous couper les cheveux en toute

simplicité. Vous pouvez la déplacer sur toutes

les zones de la tête, comme si vous passiez vos

doigts dans vos cheveux. Avant de l’utiliser, nous

vous conseillons de consulter les informations

ci-dessous.

Description générale (fig. 1)

1 Bloc tondeuse

2 Tête pivotante

3 Anneau de réglage de la hauteur de coupe

4 Bouton marche/arrêt

5 Voyant de charge

6 Grand sabot

7 Indicateur de la hauteur de coupe

8 Petit sabot

9 Sabot de précision (accessoire)

10 Adaptateur secteur

11 Brossette de nettoyage

12 Huile

important

Lisez attentivement ce mode d’emploi avant

d’utiliser l’appareil et conservez-le pour un usage

ultérieur.

Danger

- Veillez à ce que l’adaptateur ne soit pas en

contact avec de l’eau.
Avertissement

- L’adaptateur contient un transformateur.

N’essayez pas de remplacer la fiche de

l’adaptateur pour éviter tout accident.

- Cet appareil n’est pas destiné à être utilisé

par des personnes (notamment des enfants)

dont les capacités physiques, sensorielles

ou intellectuelles sont réduites, ou par des

personnes manquant d’expérience ou de

connaissances, à moins que celles-ci ne soient

sous surveillance ou qu’elles n’aient reçu des

instructions quant à l’utilisation de l’appareil par

une personne responsable de leur sécurité.

- Veillez à ce que les enfants ne puissent pas

jouer avec l’appareil.

Troubleshooting

This chapter summarises the most common

problems you could encounter with the appliance.

If you are unable to solve the problem with the

information below, visit www.philips.com/

support for a list of frequently asked questions

or contact the Consumer Care Centre in your

country.

Problem

Solution

The appliance

does not

work when I

switch it on.

Charge the appliance (see

chapter ‘Charging’). Make

sure that the appliance plug

is inserted properly into the

appliance and the adapter is

connected properly to the

wall socket. The charging light

flashes white to indicate that the

appliance is charging.
You can also use the appliance

when it is connected to the

mains.

I do not

know how

to attach

the comb

attachments

to the

appliance.

To attach the comb attachments,

simply slide them into the slot in

the appliance.

I do not

know how to

change the

hair length

settings of

the comb

attachments.

You can change the hair

length settings of the comb

attachments with the length

setting adjustment ring on the

appliance. Turn the ring to set

the comb attachment to the

desired setting. See chapter

‘Using the appliance’, section

‘Clipping with comb attachment’

The adapter

fell into water.

The adapter is waterproof. You

only have to dry it thoroughly

with a towel and then you can

use it again.

One of

the comb

attachments

is damaged

or worn.

Do not use the comb

attachment anymore. Replace it

with an attachment or comb of

the original type. You can obtain

a replacement comb attachment

from your local Philips dealer or

you can visit www.philips.com/

shop. For more information you

can contact the Consumer Care

Centre.

replacement

Only replace a worn or damaged cutting element

with an original Philips cutting element, available

from authorised Philips service centres.

Environment

- Do not throw away the appliance with the

normal household waste at the end of its life,

but hand it in at an official collection point for

recycling. By doing this, you help to preserve

the environment (Fig. 22).

- The built-in rechargeable battery contains

substances that may pollute the environment.

Always remove the battery before you

discard and hand in the appliance at an official

collection point. Dispose of the battery at an

official collection point for batteries. If you have

trouble removing the battery, you can also take

the appliance to a Philips service centre. The

staff of this centre removes the battery for you

and disposes of them in an environmentally

safe way (Fig. 23).
removing the rechargeable battery

Only remove the rechargeable battery when you

discard the appliance. Make sure the battery is

completely empty when you remove it.
Do not connect the appliance to the mains again

after you have removed the rechargeable battery.

1

Disconnect the appliance from the mains and

let the appliance run until the motor stops.

2

Remove the upper housing part of the

appliance (Fig. 24).

3

Open the inner body with a screwdriver.

4

Use a screwdriver to remove the

rechargeable battery from the

appliance (Fig. 25).

5

Cut the wires with a pair of household

scissors.
guarantee and service

If you need service or information or if you have

a problem, please visit the Philips website at

www.philips.com or contact the Philips

Consumer Care Centre in your country. You find

its phone number in the worldwide guarantee

leaflet. If there is no Consumer Care Centre in

your country, go to your local Philips dealer.

Advertising