Blue Rhino UNIFLAME GBC1059WE-C - Manuel (Page 3)

Contact 1.800.762.1142 for assistance. Do not return to place of purchase.
page no.
3
Tools Required for Conversion (Not Included)
#2 Phillips Head Screwdriver 1 pc
M10 Wrench 1 pc
M16 Wrench 2 pcs
M22 Wrench 1 pc
1
Parts List
1 Natural Gas Hose 55-08-212
2 Quick Connect 55-10-339
Exploded View
2
Hardware (Not Included)
A
Screw M4x10 Nickel Plated Phillips Truss Head
B
Screw M6x10 Nickel Plated Phillips Truss Head
C
Nut M4 Nic kel Plated
D
Nut M12 Nickel Plated
E
Washer ø4.2 Nickel Plated
F
Pin
G
Pin
H
Cotter Pin
Tools Required for Conversion (Included)
Wrench 1 pc
1
DO NOT RETURN PRODUCT TO STORE.
For assistance call 1.800.762.1142 toll free. Please have
your owner’s manual and model number available for
reference.
For Easiest Conversion:
• To avoid losing any small components or hardware, assemble
your product on a hard level surface that does not have cracks
or openings.
• Clear an area large enough to layout all components and
hardware.
• When applicable, tighten all hardware connections by hand
first. Once the step is completed go back and fully tighten all
hardware.
• Follow all steps in order to properly convert your product.
• Complete steps as applicable to your grill.
To complete conversion you will need:
• (1) Leak Detection Solution (Instructions on how to make
solution are included in the “Operating Instructions” section of
this manual)
Typical conversion: approximately 1 (one) hour.
Conversion Instructions
2
Remove Warming Racks, Cooking Grids and Heat Plates
GBC1059WB-C / GBC1059WE-C / GBC1076WE-C
GBC1069WB-C