Philips Lumea Épilateur à lumière intense pulsée - Manuel (Page 39)

Problem Possible cause Solution
The adapter is
not inserted
properly into
the wall socket
and/or the
small plug is
not inserted
properly into
the appliance
socket.
Make sure the adapter is
inserted properly into the
wall socket and/or the small
plug is inserted properly into
the appliance socket.
The appliance
is broken.
Contact the Consumer Care
Centre in your country, your
Philips dealer or a Philips
service centre.
I have switched on
the appliance but I
cannot increase or
decrease the light
intensity.
The appliance
has to be
reset.
To reset the appliance,
switch off the appliance and
then switch it on again. If
you still cannot adjust the
light intensity, contact the
Consumer Care Centre in
your country, your Philips
dealer or a Philips service
centre.
The ‘ready to flash’
light does not go
on when I place the
appliance on the skin.
You have not
put the body
attachment
with safety ring
properly on
the skin.
Place the appliance at a
90° angle onto the skin in
such a way that all contact
switches touch the skin. Then
check if the ‘ready to flash’
light is on and press the flash
button.
English 39