Sleek look, Cleaning – Philips Brosse multi-styles Manuel d'utilisation

Page 11

Advertising
background image



Press the lever to open the attachment and place a lower section

of the same lock of hair between the plates. Make sure there is an

overlap. Repeat this process until you have reached the end of the

lock.

5

Let the crimps cool down. Do not brush or comb the crimps, as

this wil ruin them.

waves, curls and crimps disappear if your hair gets wet (for instance

when you wash it). You can also use the straightening plates to make

them disappear.

sleek look

1

Open the crimping/straightening attachment. Remove the plates

one by one by grabbing their cool tips and pulling them out of the

attachment (Fig. 11).



Turn the plates upside down and slide them back into the

attachment (Fig. 1).

Make sure that you insert the edges of the plates properly into the

grooves.



You have now turned the crimping attachment into a straightening

attachment. Connect the attachment to the handle and follow the

same procedure as for creating crimps.

Another method to straighten the hair is to slide the straightening

attachment slowly down the lock.



Let the sleek hair cool down before you comb or brush it.

If you have natural curls or waves, the straight result disappears if your

hair gets wet (for instance when you wash it).

Cleaning

Never immerse the appliance in water or rinse it under the tap.

1

Remove the mains plug from the wall socket.



Place the styler on the support of the attachment in a safe place

and let it cool down.

EnglisH

11

Advertising