Cycle guide – manual cycles, Cycle guide – steam cycles, Adjusting drying time on timed dry cycles – Whirlpool WED8900BW Manuel d'utilisation

Page 7: Selecting the temp

Advertising
background image

7

Items to refresh:

Cycle:

Temp:

Default

Time:

Available

Options:

Cycle Details:

Mixed Loads

Enhanced Touch

Up

High

Medium

22

Wrinkle Prevent

Reduce Static

Extended high-heat drying cycle intended to

help sanitize items such as bedding, towels,

and baby wear. This cycle is not recommended

for all fabrics. For best results, run cycle to

completion, do not interrupt.

Shirts, blouses, and

slacks

Quick Refresh (on

some models)

High

12

Offers stepped drying starting with High heat,

followed by Medium heat for enhanced fabric

care and energy savings.

Items to dry:

Cycle:

Temp:

Default

Time:

Available

Options:

Cycle Details:

Small loads and

sportswear

Quick Dry

High

Medium

Low

Extra Low

Air Only

13

Wrinkle

Shield

For small loads of 3-4 items

Any load

NOTE: Select Air

Only to dry foam,

rubber, plastic, or

heat-sensitive fabrics

Timed Dry

High

Medium

Low

Extra Low

Air Only

40

Use to dry items to a damp level for items that do not require

an entire drying cycle. Select a drying temperature based

on the type of fabrics in your load. If you are unsure of the

temperature to select for a load, select the lower setting rather

than the higher setting.

Small to medium

loads

Touch Up (for

non-steam

models)

20

Use this setting to help smooth out wrinkles from such items as

garments packed in a suitcase or garments wrinkled from being

left in the dryer.

Cycle Guide – Manual Cycles

Settings and options shown in

bold are default settings for that cycle. Not all features and cycles are available on all models.

Not all settings and options are available on each cycle. Default cycle times are estimated in minutes.

Cycle Guide – Steam Cycles

Settings and options shown in

bold are default settings for that cycle. Not all settings and options are available on each cycle.

Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.

Adjusting drying time on Timed Dry Cycles

When you select a Timed Dry Cycle,

the default time appears in the display.

Use the Time Adjust buttons to increase

or decrease the time in 1 minute

increments. Press and hold to change

the time in 5 minute increments.
The maximum dry time is 90 minutes.

Or Wrinkle Shield

with Steam (on some models). Wrinkle Shield

with Steam is available only with High and Medium Temp

settings.

Selecting the Temp

A High heat setting may be used for drying heavyweight

items such as towels and work clothes.
A Low to Medium heat setting may be used for drying

medium-weight items such as sheets, blouses, dresses,

underwear, permanent press fabrics, and some knits.
Use a no-heat (Air Only) setting for foam, rubber, plastic,

or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures

for various loads, refer to the care label directions.

Or Wrinkle Shield

with Steam (on some models). Wrinkle Shield

with Steam is available only with High and Medium Temp

settings.

Load Size Recommendations

For best results, follow the wet load size recommendations noted

for each cycle.

Small load: Fill the dryer drum with 3-4 items,

not more than 1/4 full.

Medium load: Fill the dryer drum up to about 1/2 full.

Large load: Fill the dryer drum up to about 3/4 full.

Do not overload. Items need to tumble freely.

Advertising
Ce manuel est liée aux produits suivants: