Washer maintenance, Washer care (cont.) – Whirlpool WFW81HEDW Manuel d'utilisation

Page 14

Advertising
background image

14

WASHER CARE (cont.)

Removing the Dispenser
To remove:
1.
Pull dispenser drawer out until it stops.
2. Press down on the release tab and pull straight out to

remove the dispenser.

3. Lift off cover panel by

pulling straight up.

To replace:
1.
Slide cover panel back

onto posts on dispenser.

2. Align edges of dispenser

with guides in washer,

then slide dispenser

back into slot.

WASHER CARE (cont.)

Description of Clean Washer with affresh

®

Cycle

Operation:
1.
The Clean Washer with affresh

®

cycle will determine

whether clothing or other items are in the washer.

2. If no items are detected in the washer, it will proceed

with the cycle.

a. If any items are detected in the washer, “rL” (remove

load) will be displayed. The door will unlock. Open

washer and remove any garments from the washer

drum.

b. Touch POWER to clear the “rL” code.

c. Touch and hold START to restart the cycle.

3. Steam models only: During the first 20 minutes of the

cycle, it will activate the steamer but the drum will not spin

or fill with water. You may see condensation on the door

glass during this initial phase. If you are using an affresh

®

Washer Cleaner tablet, it will not dissolve completely

during the steam phase. This is normal.

After the cycle is complete, leave the door open slightly to

allow for better ventilation and drying of the washer interior.

Cleaning the Dispensers
After a period of using your washer, you may find some

residue buildup in the washer’s dispensers. To remove

residue from the dispensers, remove the drawer and wipe

the surfaces with a damp cloth and towel dry either before

or after you run the Clean Washer with affresh

®

cycle. Use

an all-purpose surface cleaner, if needed.
IMPORTANT: Dispenser is not dishwasher safe.
Cleaning the Outside of the Washer
Use a soft, damp cloth or sponge to wipe up any spills.

Occasionally wipe the outside of your washer to help

keep it looking new. Use mild soap and water.
IMPORTANT: To avoid damaging the washer’s finish, do not

use abrasive products.

Washer Maintenance

Advertising
Ce manuel est liée aux produits suivants: