Convection cooking - lower oven only – Whirlpool WGG555S0BS Manuel d'utilisation

Page 13

Advertising
background image

13

Convection Cooking - Lower Oven Only

(on some models)

During convection cooking, the fan provides increased hot air
circulation throughout the oven. The movement of heated air
around the food helps to speed up cooking by penetrating the
cooler outer surfaces.

NOTE: The convection fan may run in any non-convection cycle
or during preheat.

It is important not to cover foods so that surface areas remain
exposed to the circulating air, allowing browning and crisping.

Keep heat loss to a minimum by opening the oven door only
when necessary.

Choose cookie sheets without sides and roasting pans with
lower sides to allow air to move freely around the food.

Test baked goods for doneness a few minutes before the
minimum cooking time with a method such as a toothpick.

Use a meat thermometer to determine the doneness of meats
and poultry. Check the temperature of pork and poultry in 2 or
3 different places, including the thickest part.

Before convection cooking, position the rack(s) according to
the “Positioning Racks and Bakeware” section.

When using more than one rack, position bakeware/
cookware on the racks to allow movement of the fan
circulated air around the food. See the “Positioning Racks
and Bakeware” section.

If the oven is full, extra cooking time may be needed.

For optimal cooking results, do not cover food.

When roasting poultry and meat, use a broiler pan and grid. It
is not necessary to wait for the oven to preheat, unless
recommended in the recipe. To order a broiling pan, see
“Assistance or Service” section.

Convection Baking

Use Convect for single or multiple-rack baking. When convection
baking, reduce the recipe baking temperature by 25°F (15°C).

To Set Convect Bake:

1. Press CONVECT until “CONVECT BAKE” is displayed in the

lower text area, followed by “Push START.”

2. Press START for the desired oven.

“Set temp or Push START” will scroll in the display.

3. Use the number keypad to enter the desired temperature.

4. Press START for the desired oven.

“CONVECT BAKE” will scroll in the lower oven text area, and
“Rapid preheating for single rack. Press Start to preheat for
multi-rack baking” will scroll in the lower oven text area until
the set temperature is reached.

NOTE: If the upper oven is on, the lower oven will default to
the standard preheat/multi-rack baking option.

5. If multi-rack baking is desired, press START for the desired

oven when prompted in the display.

If multi-rack baking is selected, “Standard preheating for
multi rack baking. Press Start to preheat for single rack” will
appear in the display, followed by “Preheating for multi rack
baking.”

6. “Insert food for one rack baking only” will scroll twice in the

lower text area once the one-rack preheat temperature is
reached.

If multi-rack backing was selected, or if the upper oven is on,
“Insert food for multirack baking” will scroll twice in the lower
text area once the multi-rack preheat temperature is reached.

7. When the preheat cycle is complete, “CONVECT BAKE” will

appear in the lower oven text area until Cancel for the desired
oven is pressed.

8. Place food in the oven.

To change the oven temperature during cooking, use the
number keypad to enter the desired temperature, and then
press START for the desired oven.

9. Press CANCEL for the desired oven when finished.

10. Remove food from the oven.

Convect Broiling

1. Press CONVECT until “CONVECT BROIL” is displayed in the

lower text area, followed by “Push START.”

2. Press START for the desired oven.

“Set temp or” will scroll in the lower oven text area, followed
by “Push START.”

3. Use the number keypad to enter the desired temperature.

4. Press START for the desired oven.

“CONVECT BROIL” will appear in the lower oven text area,
followed by “Preheating.”

“Preheating” remains in the lower oven text area until the set
temperature is reached.

5. When the preheat cycle is complete, “CONVECT BROIL” will

appear in the lower text area. The set temperature will also be
displayed.

6. To change the oven temperature during cooking, use the

number keypad to enter the desired temperature, and then
press START for the desired oven.

“CONVECT BROIL” will remain in the lower oven text area
until Cancel for the desired oven is pressed.

7. Press CANCEL for the desired oven when finished.

8. Remove food from the oven.

Convection Roasting

1. Press CONVECT until “CONVECT ROAST” is displayed in the

lower text area, followed by “Push START.”

2. Press START for the desired oven.

“Set temp or” will scroll in the lower oven text area, followed
by “Push START.”

3. Use the number keypad to enter the desired temperature.

A. Broiler grid
B. Broiler pan

A

B

Advertising
Ce manuel est liée aux produits suivants: