Whirlpool XHPC155XG - Manuel (Page 6)

6
4.
Secure pedestal to dryer
Position the pedestal toward the front of the dryer and install
the two remaining hex-head sheet metal screws. Do not tighten
completely. Now proceed to “Complete the pedestal installation”.
4.
Secure pedestal to washer
Position the pedestal toward the front of the washer and
install the two remaining hex-head sheet metal screws.
Do not tighten completely. Now proceed to “Complete
the pedestal installation”.
2.
Prepare the dryer
Dryer bottom
Partially install two of the #12 x 3/4" hex-head sheet metal
screws in the indicated holes. Leave a space of about 3/8"
(10 mm) between the screw head and the bottom of the dryer.
note: If your dryer has leveling feet installed, remove them.
Do not install the feet that came with the new dryer.
Installing the pedestal on the dryer
3.
attach pedestal to dryer
Move the pedestal against the dryer bottom. The front of
the pedestal cabinet should align with the dryer cabinet
as shown below.
Slide the pedestal’s keyhole slots over the lower two partially
installed screws.
1.
Place dryer on its side
Pedestal box
Drawer divider
To avoid floor damage and ease installation and handling,
unfold the empty pedestal box flat and place it next to the dryer.
Position the drawer divider so that it will be near the top of the
dryer, as shown. Gently tip the dryer on its side so the dryer is
resting on the drawer divider.
Pedestal Dryer
Front
view from above