Whirlpool WFW94HEAW - Manuel (Page 5)

5
6 OPTIONS
Touch to activate additional wash options or additional features
on the washer. Not all options are available on all models.
Steam Clean
The Steam Clean option adds additional soak and wash
time to many cycles to help remove tough stains, as well
as a steam boost for added cleaning power. An integrated
heater helps to maintain optimal wash temperatures. See
the “Cycle Guide” for cycles that allow the Steam Clean
option.
EcoBoost
™ option
Touch to activate the EcoBoost ™ option. The EcoBoost ™
option provides additional energy savings through reduced
hot water usage and maintains cleaning performance by
lengthening the wash time on some cycles.
Fan Dry Option (on some models)
The Fan Dry option will periodically tumble the load after the
end of the cycle for up to 12 hours while the integrated fan
circulates air through the washer to reduce humidity.
To turn on the Fan Dry option, touch Fan Dry. If, however,
the Fan Dry option is turned on, it will stay on for all future
cycles until turned back off – the washer remembers the
last on/off status set. To turn off the Fan Dry option, touch
Fan Dry.
You may also activate the Fan Dry option without running
a cycle by touching and holding POWER for one second,
then touching and holding Fan Dry for 3 seconds, then
touching and holding START for 3 seconds.
To turn off the Fan Dry option when it is running, touch
POWER.
NOTE: The door will lock while the Fan Dry option is
active. To cancel the option and unlock the door, touch
POWER.
TumbleFresh
™ Option (on some models)
The TumbleFresh ™ option will periodically tumble the
load after the end of the cycle for up to 6 hours to reduce
humidity. To turn on the TumbleFresh ™ option, touch
TumbleFresh ™ . If, however, the TumbleFresh ™ option is
turned on, it will stay on for all future cycles until turned
back off – the washer remembers the last on/off status set.
To turn off the TumbleFresh ™ option, touch TumbleFresh.
You may also activate the TumbleFresh ™ option without
running a cycle by touching and holding POWER for one
second, then touching and holding TumbleFresh for 3
seconds, then touching and holding START for 3 seconds.
To turn off the TumbleFresh
™ option when it is running,
touch POWER.
NOTE: The door will lock while the TumbleFresh
™ option is
active. To cancel the option and unlock the door, touch
POWER.
Extra Rinse
Activate this option to add an extra rinse to most cycles.
NOTE: Some cycles include this feature as a default.
See “Cycle Guide” for details.
Drum Light (on some models)
Touch and hold EXTRA RINSE for 3 seconds to turn on the
Drum Light.
Cycle Signal
Use this option to turn on or off the signal that sounds
at end of cycle.
To turn off the tones that sound when a setting is
touched: Touch and hold CYCLE SIGNAL for about
3 seconds. Repeat to turn them on.
Control Lock
Touch and hold for 3 seconds to lock the controls to avoid
unwanted changes or operation. Touch and hold 3 seconds
again to unlock. You can still touch START to pause the
cycle, or touch POWER to turn the washer off.
B
E
A
C
D
C
F
POWER
Touch to turn the washer on and off. Touch to stop/cancel
a cycle at any time.
WASH CYCLE KNOB
Use your Wash Cycle knob to select available cycles on your
washer. Turn the knob to select a cycle for your laundry load.
An LED will light up for the cycle selected.
NOTE: The Clean Washer LED will flash when the washer
has run 30 wash cycles as a reminder to run the Clean
Washer cycle.
See “Cycle Guide” for detailed descriptions of cycles.
NOTE: For best results when using the Wash & Dry cycle,
use for loads weighing 2.5 pounds and less, such as a
soccer uniform or a running tank and shorts.
START
Touch and hold until the light above START comes on to
start a cycle, or touch once while a cycle is in process to
pause it. If you want to add a garment, you can touch START
when the “Add Garment” LED is on.
DELAY WASH
Use + and – to delay the start of the wash cycle by up to
12 hours. To turn off Delay Wash, use + and – to set the
delay time to “0,” or touch POWER.
LED DISPLAY AND SETTINGS
When you select a cycle, its default settings will light up and
the Estimated Time Remaining will be displayed. Factors such
as load size, wash temperature, and water pressure may affect
the time shown in the display during the cycle. Tightly packing
garments, unbalanced loads, or excessive suds may cause the
washer to adjust the cycle time, as well.
Touch the desired option along the bottom of the display to
adjust settings. See “Cycle Guide” for available settings on
each cycle. Not all settings are available with all cycles.
Cycle Status Lights
For details, see “Cycle Status Lights”.
Wash Temp
The recommended wash temperature is preset for each
cycle. You may also select a wash temperature based on
the type of fabric and soils being washed. For best results,
follow the garment label instructions. All wash temperatures
feature a cold rinse.
Spin
This washer automatically selects the spin speed based on
the cycle selected. Some preset speeds can be changed.
• Faster spin speeds mean shorter dry times, but may
increase wrinkling in your load.
• Slower spin speeds reduce wrinkling, but will leave
your load more damp.
Soil
The Soil setting (wash time) is preset for each wash cycle.
For most loads, use this preset soil level. When you change
the soil setting, the cycle time will increase or decrease in the
Estimated Time Remaining display.
For heavily soiled and sturdy fabrics, use the Soil setting to
select more wash time. For lightly soiled and delicate fabrics,
use the Soil setting to select less wash time. Lower soil level
settings will help reduce tangling and wrinkling.
Presoak
Touch to add a Presoak time of your choice to a wash
cycle. Items will gently tumble through the detergent and
water for the selected time to help loosen tough stains.
1
2
3
4
5