Installation requirements – Whirlpool WFW81HEDW Manuel d'utilisation

Page 2

Advertising
background image

2

Alternate parts:

(Not supplied with washer)

Your installation may require additional parts. To order, please

refer to toll-free numbers on the back page of your “Use and

Care Guide”.

If you have:

You will need:

Overhead sewer

Standard 20 gal. (76 L) 39" (990 mm)

tall drain tub or utility sink, sump

pump and connectors (available from

local plumbing suppliers)

1" (25 mm) standpipe

2" (51 mm) diameter to 1" (25 mm)

diameter Standpipe Adapter

Part Number 3363920

Connector Kit Part Number 285835

Drain hose too short

Extension Drain Hose Part

Number 285863

Connector Kit Part Number 285835

Lint clogged drain

Drain Protector Part Number 367031

Connector Kit Part Number 285835

Floor drain system

Siphon Break Kit Part Number 285834

Connector Kit (x2) Part Number 285835

Extension Drain Hose Part

Number 285863

Alternate Inlet Hoses:

(may be required for some

installations, not supplied with washer)

n

8212656RP 10 ft. (3.0 m) Inlet hose, Black EPDM (2 pack)

n

8212641RP 5 ft. (1.5 m) Inlet hose, Black EPDM (2 pack)

n

8212546RP 4 ft. (1.2 m) Inlet hose, Black EPDM (2 pack)

n

8212545RP 5 ft. (1.5 m) Inlet hose, Red and Blue EPDM

(2 pack)

n

8212487RP 5 ft. (1.5 m) Nylon braided inlet hose (2 pack)

n

8212638RP 6 ft. (1.8 m) Nylon braided inlet hose, space

saving 90° elbow, hypro-blue steel couplings

(2 pack)

n

8212637RP 6 ft. (1.8 m) Inlet hose, Black EPDM, space

saving 90° elbow, hypro-blue steel couplings

(2 pack)

Optional tools:

Parts supplied:

NOTE: All parts supplied for installation are in the washer

basket.

4" min

(102 mm)

Wood block

Adjustable or open end

wrenches 1/2" (13 mm)

and 9/16" (14 mm)

Ruler or measuring tape

Level

Pliers that open to

1

9

16

" (39.5 mm)

Flashlight

Bucket

Cable tie

Drain hose with clamp

and form (may be shipped

unassembled)

Tools needed:

INSTALLATION REQUIREMENTS

TOOLS AND PARTS

Gather required tools and parts before starting installation.

Transport bolt hole

plugs (4)

Available Accessories:

An optional matching pedestal is available for your washer.

Please contact your retailer for ordering information, or see

the “Assistance or Service” page on the back of your “Use and

Care Guide”.

Parts needed:

(Not supplied with washer)

Water inlet hoses (2)

Flat inlet hose washers (4)

Advertising
Ce manuel est liée aux produits suivants: