Select temperature, Press start/pause/unlock to begin wash cycle, Select options – Whirlpool WTW4880AW Manuel d'utilisation

Page 9

Advertising
background image

9

Wash Temp

Hot
Some cold water is added to save

energy. This will be cooler than

your hot water heater setting.

Warm
Some cold water will be added, so

this will be cooler than what your

previous washer provided.

Cool Lights
Warm water is added to assist in

soil removal and to help dissolve

detergents.

Cool Darks
Warm water may be added to

assist in soil removal and to help

dissolve detergents.

Cold
This is the temperature from your

faucet. If your tap cold water is

very cold, warm water may be

added to assist in soil removal and

help dissolve detergent.

Suggested Fabrics

7.

Select Temperature

Once you select a cycle, select the desired wash temperature

by turning the Temperature knob to the appropriate setting

based on your load. All rinses are tap cold.
NOTE: Always read and follow fabric care label instructions

to avoid damage to your garments.

9.

Press START/Pause/Unlock

to begin wash cycle

Press the START/Pause/Unlock button to start the wash

cycle. Filling is delayed for several minutes while load

balance is sensed. When the cycle has finished, the DONE

indicator will light. Promptly remove garments after cycle

has completed to avoid odor, reduce wrinkling, and rusting

of metal hooks, zippers, and snaps.
Unlocking the lid to add garments
If you need to open the lid to add 1 or 2 missed garments:
Press START/Pause/Unlock; the lid will unlock once the

washer movement has stopped. This may take several

minutes if the load was spinning at high speed. Then close

lid and press START/Pause/Unlock again to restart the cycle.
If lid is left open for more than 10 minutes, the water will

pump out automatically.
Delay in water fill
Filling is delayed for 2 to 3 minutes to check for load

unbalance. You will hear the hum of the spin prior to filling.

This is normal operation.

Select the desired cycle options. If you are using fabric

softener, be sure to select Fabric Softener Added-Yes option.

Select Deep Water Wash option for higher water level than

other cycles, which can be used with Super Wash cycle only.

Whites and pastels
Durable garments

Heavy soils

Bright colors
Moderate to light soils

Colors that bleed

or fade
Light soils

Dark colors that bleed

or fade
Light soils

Dark colors that

bleed or fade
Light soils

8.

Select options

Advertising