Whirlpool WVI75UC6DS - Manuel (Page 12)

12
RANGE HOOD USE
The range hood is designed to remove smoke, cooking vapors and
odors from the cooktop area. For best results, start the hood
before cooking and allow it to operate several minutes after the
cooking is complete to clear all smoke and odors from the kitchen.
The hood controls are located on the front of the canopy.
Range Hood Controls
Operating the LED task light
The On/Off light button controls both lights. Press once for On
and again for Off.
Operating the blower
The Blower Speed buttons turn the blower on and control the
blower speed and sound level for quiet operation. The speed can
be changed anytime during fan operation by pressing the desired
Blower Speed button.
The Blower Off button turns the blower Off.
Operating the Ambient Lighting
The switch controls the ambient lighting.
1. Press to the left to turn AUTO On.
2. Press to the right to turn AMBIENT LIGHTING On.
3. Press to the center to turn AMBIENT LIGHTING or AUTO Off.
NOTE: When the Ambient Lighting is placed in the AUTO setting,
a sensor will automatically sense if it is dark in the area around
the range hood. The Ambient Lighting will turn on and stay on
until it senses there is enough light in the area around the range
hood, or the Ambient Lighting switch is placed in the ON or OFF
position.
A. Louver holes
(non-vented
[recirculating]
installations
only)
B. Duct covers
C. Control panel
D. LED lights
E. Metal grease filters
(located behind the
perimetric cover)
F. Perimetric cover
G. Glass canopy
H. Light switch (ambient
lighting)
A
B
C
D
E
F
G
H
A. On/Off LED task light button
B. Blower Off button
C. Blower speed minimum button
D. Blower speed medium button
E. Blower speed maximum button
A B C D E