Pioneer BDP-LX70A - Manuel

En
Connecting your TV and AV receiver using HDMI cables
• Using HDMI cables allows you to transfer signals to an HDMI-compatible TV and AV receiver in digital format, with no loss in picture or
sound quality.
• When connecting this player to your TV, AV receiver or other equipment, make sure that all components are ‘switched off’ and
‘unplugged’.
• Also refer to the instruction manuals of the connected components.
Audio formats supported by HDMI output of this player
• 8-channel linear PCM signals (44.1 kHz to 192 kHz, 16 bit/20 bit/
24 bit)
There are some restrictions depending on the sampling rate.
(See page 42 in the Operating Instructions.)
• Dolby TrueHD (7.1 channel signals) *1
• Dolby Digital Plus (7.1 channel signals)
*1
• Dolby Digital (5.1 channel signals)
• DTS-HD Master Audio (7.1 channel signals)
*2
• DTS-HD High Resolution Audio (7.1 channel signals)
*2
• DTS (5.1 channel signals)
*1 If the connected HDMI device is not compatible with Dolby TrueHD
or Dolby Digital Plus, the signal will be output as Dolby Digital.
*2 If the connected HDMI device is not compatible with DTS-HD
Master Audio or DTS-HD High Resolution Audio, the signal will be
output as DTS.
Important
• Depending on the HDMI cable being used, 1080p output may
not appear correctly. We recommend using a commercially
available HDMI cable that supports the HDMI 1.3 specification
(Category 2) or later. (The supplied HDMI cable is capable of
outputting 1080p video.)
• If you change any components connected to the HDMI output,
press the OUTPUT RESOLUTION button to change the output
video resolution settings. (See page 12 in the Operating
Instructions.)
• DVI devices that are not compatible with HDCP (computer
displays, etc.) cannot be connected to this player.
AUDIO OUT
(5.1ch)
DIGITAL AUDIO OUT
AUDIO OUT
(2ch)
CENTER
SUB WOOFER
FRONT SURROUND L L
R
R
COAXIAL OPTICAL COMPONENT VIDEO OUT
VIDEO OUT
LAN(100) HDMI OUT
Y
S
P B
P R
SETTING 2
SETTING 1
IR RECEIVER
IR
CONTROL
IN
IN
Rear panel of this player
HDMI-compatible display
To HDMI input
To HDMI input
From HDMI output
AV receiver
HDMI cable (supplied)
HDMI cable
(not supplied)
<VRR1089-A>