Daily use, 1 using the detergent, 2 setting and starting a programme – AEG F55522VI0 Manuel d'utilisation

Page 33: The auto off function, Starting a programme, Starting a programme with delay start

Advertising
background image

9. DAILY USE

1. Open the water tap.

2. Press the on/off button to activate

the appliance.

Make sure that the appliance is in

programme selection mode.

• If the salt indicator is on, fill the

salt container.

• If the rinse aid indicator is on, fill

the rinse aid dispenser.

3. Load the baskets.

4. Add the detergent. If you use multi-

tablets, activate the option Multitab.

5. Set and start the correct programme

for the type of load and the degree

of soil.

9.1 Using the detergent

A

B

C

CAUTION!

Only use detergent

specifically designed for

dishwashers.

1. Press the release button (A) to open

the lid (C).

2. Put the detergent, in powder or

tablets, in the compartment (B).

3. If the programme has a prewash

phase, put a small quantity of

detergent on the inner part of the

appliance door.

4. Close the lid. Make sure that the lid

locks into position.

9.2 Setting and starting a

programme

The Auto Off function

This function decreases energy

consumption by deactivating

automatically the appliance when it is not

operating.
The function comes into operation:

• 5 minutes after the completion of the

programme.

• After 5 minutes if the programme has

not started.

Starting a programme

1. Keep the appliance door ajar.

2. Press the on/off button to activate

the appliance. Make sure that the

appliance is in programme selection

mode.

3. Press repeatedly

until the display

shows the number of the programme

you want to start. The display will

show the programme number for

approximately 3 seconds and then

show the programme duration.

The display will show the programme

number for approximately 3 seconds and

then show the programme duration.

4. Set the applicable options.

5. Close the appliance door to start the

programme.

Starting a programme with

delay start

1. Set a programme.
2. Press

again and again until the

display shows the delay time you

want to set (from 1 to 24 hours).

The delay indicator comes on.

3. Close the appliance door to start the

countdown.

While a countdown is running it is

possible to increase the delay time but

not to change the selection of the

programme and options.

When the countdown is completed, the

programme starts.

ENGLISH

33

Advertising