AEG A35020GSW0 - Manuel (Page 26)

WHAT TO DO IF…
WARNING!
Before troubleshooting, disconnect the mains plug from the mains socket.
Only a qualified electrician or competent person must do the troubleshooting that is not in
this manual.
Problem Possible cause Solution
The appliance does not
operate. The Pilot light
does not flash. The appliance is switched off. Switch on the appliance.
The mains plug is not connected
to the mains socket correctly. Connect the mains plug to the
mains socket correctly.
The appliance has no power.
There is no voltage in the mains
socket. Connect a different electrical ap Š
pliance to the mains socket.
Contact a qualified electrician.
The Pilot light flashes. The appliance is not working
properly. Contact a qualified electrician.
The Alarm light flashes. The temperature in the freezer is
too high. Refer to "Excessive Temperature
Alarm"
The compressor operates
continually. The temperature is not set cor Š
rectly.
Set a higher temperature.
The door is not closed correctly. Refer to "Closing the door".
The door has been opened too
frequently. Do not keep the door open longer
than necessary.
The product temperature is too
high. Let the product temperature de Š
crease to room temperature be Š
fore storage.
The room temperature is too
high. Decrease the room temperature.
The Fast Freeze function is
switched on. Refer to "Fast Freeze function".
The temperature in the
freezer is too low. The temperature regulator is not
set correctly. Set a higher temperature.
The Fast Freeze function is
switched on. Refer to" Fast Freeze function".
The temperature in the
freezer is too high. The temperature regulator is not
set correctly. Set a lower temperature.
The door is not closed correctly. Refer to "Closing the door".
The product temperature is too
high. Let the product temperature de Š
crease to room temperature be Š
fore storage.
26 What to do if…