NaceCare Solutions TT1120 - Manuel (Page 7)

7
Machine Set Up
Please read before commencing any operation.
After the removal of all the packaging, carefully open and check the contents.
!
Fit the top tank to the machine
(fig 3).
Fit both the vacuum hose and the
floor tool hose to the separator
(fig 4).
Fitting top tank
Fitting the brush
Featuring the Nulock brush system.
The brush is simply pushed and twisted to lock, making fitting and removal a simple process.
The Pad is retained using Numatic’s own PadLoc system. (Ask your supplier for details)
Only use manufacturer supplied brushes / pads.
TT 1117 requires a 17” brush or pad.
TT 1120 requires a 17” brush or pad
Safety gloves are recommended for the changing of used brushes.
Fit the brush /pad to the drive chuck,
twist to lock the brush
(Fig 5) / pad in place (Fig 6).
Fig 6
Fig 5
!
Tilting the handle
Using the handle position lever
(fig 1).
Move the handle into the upright
position (fig 2).
Fig 1 Fig 2
Fig 3 Fig 4