Napoleon Fireplaces GSS36 - Manuel (Page 13)

13
W415-0807 / B / 04.18.12
HOOD
CURTAIN
MESH
Remove the backing of the logo supplied and place on the screen cover, as indicated.
5.2 HOOD
5.3 LOGO PLACEMENT
The curtain mesh must be kept fully closed during operation to help
prevent accidental burns from occurring.
The heater must not be used when the hood is removed. Hook
the hood over the lip of the curtain
support plate.
5.4 LOUVRE INSTALLATION
LOUVRE
HOOD
SLOT
BRACKET
A
HINGE SCREEN
C
LOWER LOUVRES
(VALVE CONTROL DOOR)
B
HINGE SCREEN: Position the hinge screen into
place and with the control door open, secure to the
fi rebox using three screws.
UPPER LOUVRES: Insert the
upper louvres into the slots
on both brackets. Press the
top fl ange of the hood into
the four clips located along
the top of the appliance as
shown.
LOWER LOUVRES: Attach
each hinge to the fi rebox with
2 screws.