Napoleon Fireplaces Vector 50 - LHD50 Manuel d'utilisation
Page 57
57
W415-0745 / F / 08.26.13
EN
11.10 PORCELAIN
WRAP
A.
Remove Media Tray, see “BURNER REMOVAL” section.
NOTE: For One Side appliance, the porcelain wrap must be removed prior to media tray.
B.
Remove the porcelain side panels by lifting them from the bottom and sliding them out from the tabs
as illustrated.
C.
Remove the 4 bolts and replace the latch assembly. Adjust the tension of the latches to ensure proper
door seal.
NOTE: Be careful not to tear the latch assembly gasket. Replacement gaskets can be ordered
from your local authorized dealer / distributor.
D.
Reinstall the porcelain side panels, the porcelain wrap (if applicable) and the media tray.
PORCELAIN
SIDE PANELS
1
TABS
BOLTS
LATCH
ASSEMBLY
2
3
11.11
DOOR LATCH REPLACEMENT
SCREWS
A.
Remove the two screws on either
top side of the porcelain wrap.
B.
Tip the wrap forwards and lift out.