Sony D-NS921F - Manuel (Page 28)

28
-GB
To preset stations manually
If the stations cannot be preset automatically, preset the stations manually.
1 Press FM or AM to select the band (direct power-on).
2 Press FM or AM for 2 seconds or more to enter the
preset mode.
The preset number 1 will flash in the display.
3 While the preset number 1 is flashing, tune in a station you want by pressing TUNING + or –,
and select a preset number by pushing the 4-way control key toward . or >.
4 To store, press DISPLAY (MEMORY) while the preset number is flashing.
If there was a station stored on this preset number, the newly preset station will replace the old
one and the preset number increases by one.
5 To continue storing, repeat steps 3 and 4.
Note
If you cannot complete step 3 or 4 while the preset number is flashing in the display, repeat from step 2.
To stop storing
• Press FM or AM for 2 seconds or more.
• Push the 4-way control key toward x•CHG (RADIO OFF).
The radio is turned off at the same time.
To play preset stations
1 Press FM or AM.
2 Push the 4-way control key toward . or > to tune in a stored station.
Changing the tuning interval
When using the CD player abroad, change the AM tuning interval, if necessary. Set the STEP
switch (inside the lid) to “9 kHz” or “10 kHz” using a pointed material.
9 kHz area: Asia and Europe
10 kHz area: the U.S.A., Canada and South America
Notes
• The interval will not change until you once turn off the radio and then turn it on again.
• After changing the tuning interval, you need to preset radio stations again.