Sony PCG-F520 - Manuel (Page 38)

Notebook User Guide &
 Remove the PC card slot protector.
When you use a Type III PC card, you need to remove both the top and
bottom PC card slot protectors.
 Insert the PC card into the PC card slot, front label facing up. Gently push
the card into the slot until the card is fixed into the connector. The release
button comes out.
Do not force a card into the slot as this may damage the connector pins. If you have
difficulty inserting a card, check that you are inserting the card with the correct
orientation. See the manual that came with your PC card for more information on use.
For some PC cards, if you alternate between normal power operation and the System
Suspend or System Hibernation power-management modes while the card is inserted,
you may find that a device connected to your system is not recognized. Reboot your
system to correct the problem.
PC card
Insert with the
arrow facing forward