Installing an add-on agp card – Sony PCV-RX540 Manuel d'utilisation
Page 42
VAIO Digital Studio System Reference Manual
30
Installing an Add-On AGP Card
Your computer has one open AGP expansion slot. This slot enables you to
install an AGP card to enhance your system’s graphics capabilities. The
length of the AGP card should not exceed 9.05 inches.
1
Remove the side cover (see
2
Remove the slot cover from the AGP slot (see
3
Press down on the end latch (see diagram) before inserting the AGP
card.
4
Firmly insert the AGP card into the slot.
✍
Installing an AGP card disables the internal graphics. Your system supports AGP 4X
enabled graphics cards.
!
Before opening the system unit, save and close all open files, exit all open
applications, turn off the power to all attached peripheral devices, shut down
the computer, and unplug the power cord.
Press down on latch
before inserting card