Sony PCV-L640 - Manuel (Page 34)

VAIO Slimtop™ Reference Manual 20
AGP_INT Switch
You can enable or disable the onboard AGP interrupt.
To enable or disable the AGP_INT, perform the following steps:
1
Remove the system cover (see “Removing the System Cover” on
page 24 ).
2
Set the switch to ON (Enable) or OFF (Disable). The default is ON
(see also
“Configuration Switches (SW)” on page 68).
3 Reinstall the system cover (see “Replacing the System Cover” on
page 25).
O N
1 2 3 4 5 6
KY0
AGP_INT switch
O
N
1 2 3 4 5 6
ON
OFF
SW