Sony CDX-GT420U Manuel d'utilisation

Page 7

Advertising
background image

7

L SEEK –/+ buttons

CD/USB:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).

M MODE button page 9

To select the radio band (FM/AM); select the
play mode of ATRAC Audio Device.

N EQ3 (equalizer) button page 11

To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).

O BTM button page 9

To start the BTM function (press and hold).

P RESET button (located behind the front

panel) page 4

Q Number buttons

CD/USB:
(1)/(2): ALBUM –/+

To skip albums (press); skip albums
continuously (press and hold).

(3): REP page 9
(4): SHUF page 9
(5): DM+ page 4

To activate the DM+ function, set
“DM+-ON.” To cancel, set “DM+-
OFF.”

(6): PAUSE

To pause playback. To cancel, press
again.

Radio:
To receive stored stations (press); store
stations (press and hold).

R DSPL (display)/SCRL (scroll) button

page 9
To change display items (press); scroll the
display item (press and hold).

S AUX input jack page 12

To connect a portable audio device.

The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).

w; < (.)/, (>) buttons

To control CD/radio/USB, the same as
(SEEK) –/+ on the unit.
Setup, sound setting, etc., can be operated by
< ,.

wa DSPL (display) button

To change display items.

ws VOL (volume) +/– button

To adjust volume.

wd ATT (attenuate) button

To attenuate the sound. To cancel, press
again.

wf SEL (select) button

The same as the select button on the unit.
During the Quick-BrowZer mode, (SEL)
(select) is inactive.

wg M (+)/m (–) buttons

To control CD/USB, the same as (1)/(2)
(ALBUM –/+) on the unit.
Setup, sound setting, etc., can be operated by
M m.

wh SCRL (scroll) button

To scroll the display item.

wj Number buttons

To receive stored stations (press); store
stations (press and hold).

Notes
When ejecting/inserting a disc, keep any USB

devices disconnected to avoid damage to the disc.

If the unit is turned off and the display disappears, it

cannot be operated with the card remote
commander unless
(SOURCE) on the unit is
pressed, or a disc is inserted to activate the unit first.

About USB cap
When not using the USB terminal (
G), use the
supplied USB cap to prevent dust or dirt entering.
Keep the USB cap out of the reach of children to
prevent accidental swallowing.

Advertising