Automatic shooting, About installation – Sony IPT-DS1 Manuel d'utilisation

Page 56

Advertising
background image

20-GB

Automatic shooting

1 Set the ON/OFF (power) switch of this unit to ON.

The tilt arm moves to the initial position and this unit enters standby mode.

Notes

¦

Set the ON/OFF (power) switch to OFF when you want to stop operation

immediately or do not intend to use this unit for a long time.

Tips

¼

This unit automatically enters standby mode if automatic shooting is not

performed. You can leave the ON/OFF (power) switch of this unit to ON for

regular use.

2 Set the power switch of your camera to ON.

The camera enters shooting mode.

For details, refer to the operating instructions of your camera.

3 Attach your camera to this unit (page 18).

This unit starts automatic shooting. For details, see page 22.

Status of this unit

ON/OFF

(power) switch

of this unit

Camera

Power switch of

your camera

Status of this unit

ON

Not attached

Standby*1

Attached

OFF

ON

Automatic

shooting*2

*1 Indicator B lights up in red when an AC adaptor is connected to this unit.

*2 When the MENU button is pressed, this unit enters MENU mode.

When the ON/OFF (power) switch of this unit is set to OFF, it does not turn on

ˎ

even when you attach your camera to this unit.

About installation

Use this unit where:

it is stable and flat.

ˎ

the camera has a clear view of people’s faces.

ˎ

there are no objects nearby that may fall over.

ˎ

Advertising