Sony MSAC-US7 - Manuel (Page 22)

22-US
For Macintosh
If you are using Mac OS 9.1/9.2/Mac OS X (v10.0/v10.1), you do not need
to install a USB driver. Just connect this unit to your computer, and it will
be recognized as a drive.
P Notes
• Image Transfer does not support any version of the Mac OS.
• PIXELA ImageMixer for Sony does not support the Mac OS X operating
system.
Installing USB driver software
– For Mac OS 8.5.1/8.6/9.0 –
Follow the steps outlined below.
1
Turn on your computer.
2
Insert the supplied CD-ROM (SPVD-008 USB DRIVER) into your
computer’s CD-ROM drive.
After a short wait, a software application screen appears.
3
On the software application screen, click the USB Driver
button.
4
Double-click the hard disk icon of the device where your
operating system is installed.
5
Drag the two files below from the window opened in step 3,
and drop them on the system folder icon showing in the
window opened in step 4.
• Sony Peripheral USB Driver
• Sony Peripheral USB Shim
6
When the message is displayed, click “OK.”
The USB driver will be installed on your computer.
7
Close the software application window.
8
Remove the CD-ROM from the drive in your computer.
9
Reboot your computer.
10
Connect the USB plug on this unit to the USB jack on your
computer.