Sony SCD-XA777ES Manuel d'utilisation

Page 7

Advertising
background image

7

US

Getting Started

Connecting via DIGITAL (CD) OUT OPTICAL
connector

Use an optical digital cable for this connection. When connecting
the optical digital cable to the DIGITAL (CD) OUT OPTICAL
connector, take the cap off the connectors and push the cable
plugs in until they click into place.
Be careful not to bend or twist the optical cable.

Optical digital cable (not supplied)

Note

Only the audio signals of conventional CDs can be output from
the DIGITAL (CD) OUT connectors. Those of the Super Audio
CD cannot be output through DIGITAL (CD) OUT.

Connecting via DIGITAL (CD) OUT COAXIAL
connector

Use a coaxial digital cable to connect the audio components
equipped with coaxial digital input connectors.

Coaxial digital cable (not supplied)

Note

Only the audio signals of conventional CDs can be output from
the DIGITAL (CD) OUT connectors. Those of the Super Audio
CD cannot be output through DIGITAL (CD) OUT.

Connecting the AC power cord

Connect the supplied AC power cord to the AC IN
terminal on the player and to the mains.

About the ANALOG 2CH OUT

When you play a conventional CD or a 2CH Super Audio CD, the
stereo signal of the DSD format is sent to the FRONT,
SURROUND, and CENTER/SUB WOOFER D/A Converters,
and each signal is combined after D/A conversion, then
combined signal is output from the 2CH OUT jacks.
Since each digital signal is converted to analog signal by three
converters, this system offers a three-fold improvement in a
signal quality and a root three-fold in noise ratio, and results in
improvement in a signal to noise ratio. Therefore, the high
quality signal is output from the ANALOG 2CH OUT jacks.
However, because of the system, no signal is output from the
ANALOG 2CH OUT jacks during playback of a Multi-channel
Super Audio CD. Similarly, no signal is output from the PHONES
jack during playback of a Multi-channel Super Audio CD.

Advertising