Sony DR-BT140Q Manuel d'utilisation

Page 18

Advertising
background image

18

US

– ring tone set on the unit
– ring tone set on the mobile

phone

– ring tone set on the mobile

phone only for Bluetooth
connection

Note

If you received a call by pressing the
button on the Bluetooth mobile phone,
some Bluetooth mobile phones may have
handset use priority. In this case, set to
talk with the unit by pressing and holding
the multi function button for about 2
seconds, or by operating the Bluetooth
mobile phone. For details, refer to the
manual supplied with your Bluetooth
mobile phone.

To adjust the volume

Press the VOL +/– button.

Tips

• You cannot adjust the volume when not

communicating.

• Volume for calling and listening to

music can be adjusted independently.
Even if you change the volume while
playing back the music, the volume of a
call does not change.

To terminate a call

You can end a call by pressing the
multi function button on the unit.

To stop use

1

Terminate Bluetooth
connection by the
Bluetooth mobile phone.

2

Press and hold the
POWER button for about
2 seconds to turn off the
power.

The indicator (blue) and
indicator (red) light up together,
and the unit turns off.

B

To make a connection
with the last connected
Bluetooth device by
operating this unit

1

Press the multi function
button.

The indicator (blue) and
indicator (red) start flashing at
the same time, and the unit
performs the connection
operation for about 5 seconds.

Note

When listening to music with this unit, a
Bluetooth connection cannot be made
with the multi function button.

To call

1

Use the buttons on your
mobile phone when
making a call.

If no dial tone is heard on this
unit, press and hold the multi
function button for about 2
seconds.

Tip

You can call in the following way,
depending on the Bluetooth mobile
phone. Refer to the manual supplied with
your mobile phone on operating details.
– When not communicating, you can call

using the voice-dial function by
pressing the multi function button.

– You can call the last dialed number by

pressing the multi function button for
about 2 seconds.

To receive a call

When an incoming call arrives, a ring
tone will be heard from the unit.

1

Press the multi function
button on the unit.

The ring tone differs in the
following ways, depending on
your mobile phone.

Advertising