Sony DAV-HDX501W - Manuel (Page 4)

4 GB
Preparing for HDMI
CONTROL function
Before you use the HDMI CONTROL
function, be sure you have performed the
following procedures. For details on setting
the TV and connected components, see the
operating instructions of the respective
components.
1 Make sure that the receiver is connected to
the TV and components (compatible with
HDMI CONTROL function) via HDMI
connection.
2 Turn on the receiver, TV and connected
components.
3 Set the respective HDMI CONTROL
function for the receiver and TV to on.
See “To set HDMI CONTROL” below.
4 Select the HDMI input of the receiver and
TV to match the HDMI input of the
connected component, so that the image
from the connected component is displayed.
5 Set the HDMI CONTROL function for the
connected component to on.
6 Repeat step 5 for other components that you
want to use the HDMI CONTROL function.
1
(For remote RM-AAP016/
RM-AAP017 only)
Press RECEIVER, then press
MENU.
The RECEIVER indicator lights up and
receiver operation is activated.
“1-LEVEL” appears on the display.
(For remote RM-AAU014/
RM-AAU015/RM-AAU017 only)
Press AMP MENU.
“1-LEVEL” appears on the display.
2
Press V/v repeatedly to select
“6-VIDEO”.
3
Press or b to enter the
menu.
4
Press V/v repeatedly to select
“CONTROL”.
“HDMI” flashes on the display.
5
Press or b to enter the
parameter.
6
Press V/v repeatedly to select
“CTRL ON”.
HDMI CONTROL function is activated.
To set HDMI CONTROL