Operation for monitor, Opening the display monitor – Sony MV-900SDS Manuel d'utilisation

Page 13

Advertising
background image

13

Operation for Monitor

Opening the display
monitor

1

Slide (OPEN) to the front, and open the
display monitor.

2

Press (POWER) to turn on the player.

Tip
If your car has no ACC (accessory) position on the
ignition key switch and you set the POWER SELECT
switch to the
B position, the player does not turn
on by pressing
(POWER) on the card remote
commander (page 6).

Returning the display monitor to its
enclosure
Close the display monitor until it clicks.

Notes
• Be careful not to catch your finger in the display

monitor when closing.

• Do not put any foreign objects between the LCD

panel and the enclosure when closing.

30˚

180˚

120˚

Adjusting the tilt and swivel
The display monitor can be adjusted within the
angles shown.

Tips
• Before closing the display monitor, make sure

that the monitor is turned and facing the
enclosure (you will hear a click).

• The monitor stores the input mode you set, even

if you turn off the monitor.

The reverse position of the display monitor
You can close with the LCD surface out after
turning around 180 degrees, and images on the
screen can be turned upside down by pressing
(REVERSE). Each time you press (REVERSE),
the reverse screen mode switches between on
and off.

POWER

OPEN

180˚

x

REVERSE

x

Advertising