Sony SCD-C555ES Manuel d'utilisation

Page 7

Advertising
background image

7

US

Getting Started

About the CONTROL A1 jack

If you have a Sony component with the CONTROL
A1 (or CONTROL A1) jack

Connect the component via the CONTROL A1 (or CONTROL
A1) jack with a monaural (2P) mini-plug cord. You can simplify
the operation of audio systems composed of separate Sony
components. For details, see “Using the CONTROL A1 Control
System” on page 31.

When using another Sony CD player in
conjunction with this player

You can set the supplied remote to be effective on this player only
by changing the command mode of the remote.
If you connect this player to another Sony CD player, you have to
set the command mode of each player.

To set the command mode of the remote

• If the other player’s command mode can be set:

Set the CD1/2 switch of this player’s remote to CD1 (factory
setting), and set the other player’s remote to CD2.

• If the other player’s command mode cannot be set:

Set the CD1/2 switch of this player’s remote to CD2.

To set the command mode of this player

1

Press MENU.

2

Turn l AMS L to select “COMMAND MODE.”

3

Push l AMS L.
The current command mode appears.

4

Turn l AMS L to select CD1 or CD2, then push
l

AMS L again.

Transporting the player

Before transporting the player, follow the procedure below to
return the internal mechanisms back to their original position.

1

Remove all the discs from the disc tray.

2

Press A OPEN/CLOSE to close the disc tray.
“No Disc” appears in the display.

3

Wait for 10 seconds, then press POWER to turn off
the player.

Connecting via DIGITAL (CD) OUT OPTICAL
connector

Use an optical digital cable for this connection. When connecting
the optical digital cable to the DIGITAL (CD) OUT OPTICAL
connector, take the cap off the connectors and push the cable
plugs in until they click into place.
Be careful not to bend or twist the optical cable.

Optical digital cable (not supplied)

Note

Only the audio signals of conventional CDs can be output from
the DIGITAL (CD) OUT connectors. Those of the Super Audio
CD cannot be output through DIGITAL (CD) OUT.

Connecting via DIGITAL (CD) OUT COAXIAL
connector

Use a coaxial digital cable to connect the audio components
equipped with coaxial digital input connectors.

Coaxial digital cable (not supplied)

Note

Only the audio signals of conventional CDs can be output from
the DIGITAL (CD) OUT connectors. Those of the Super Audio
CD cannot be output through DIGITAL (CD) OUT.

Connecting the AC power cord

Connect the AC power cord to a wall outlet.

Advertising